B13 Double Spindle CNC Lathe
High Precision B13 Double Spindle Swiss Type 5 Axes Cnc Lathe For Machining Slender Shaft Metal Small Parts
Swiss Type Cnc Lathe Application:
It is capable of turning and milling combined processing. It is a high-precision, wide-ranging and practical processing equipment. This type of machine tool is suitable for large-scale and large-scale "slender shaft" parts with relatively large length and diameter, and "small" and "abnormal" parts. Variety, high-precision processing tasks, its processing range is widely applicable to various high-tech industries such as medical, aviation, aerospace, military, automobiles, motorcycles, communications, refrigeration, optics, home appliances, microelectronics, electronics, watches, mobile phones, etc. Compound processing of precision, multi-batch, complex shape shaft parts and precision small parts.
1.Using the counter spindle and the back tool post, front and back processing can be performed at the same time
2.Equipped with 3-axis lateral power head, lateral rigid tapping, front rigid tapping, back rigid tapping.
3. Equipped with no guide sleeve device, which is most suitable for high precision machining of short workpieces.
4.Adjust the chuck with the clamping force of the main shaft and the back shaft, which can easily clamp fine and precise parts Fixed guide bushes and linked guide bushes have better benefits.
5.The main shaft oil-cooled electric spindle has no dead angle cooling at high speed, and it has more uniform heat dissipation and stronger performance than ordinary air-cooled electric spindle.
6.This machine adopts absolute operation, no need to return to the original point on and off, saving time and labor and labor. Uninterrupted power supply for 24 hours, high efficiency and labor saving.
|
Power supply |
Power supply rated voltage |
Three-phase AC 380V |
|
Power supply rated frequency |
50HZ |
|
|
Total input power |
8kW |
|
|
CNC system |
BYSK |
YZ150 |
|
Small setting unit |
0.001mm |
|
|
X axis pulse equivalent |
0.0005mm |
|
|
Y axis pulse equivalent |
0.001mm |
|
|
Z axis pulse equivalent |
0.001mm |
|
|
Large programming size |
±9999.999 |
|
|
Cutting speed |
1--4000mm/min |
|
|
X axis rapid feed rate |
15000mm/min |
|
|
Y axis rapid feed rate |
15000mm/min |
|
|
Z axis rapid feed rate |
15000mm/min |
|
|
Spindle |
Large bar diameter |
Φ13mm |
|
Spindle hole diameter |
Φ14mm |
|
|
The height of the spindle center from the ground |
1010mm |
|
|
Spindle speed |
0-5000r/min |
|
|
2Spindle motor power |
2kW |
|
|
Journey |
X axis travel |
60mm (amount of diameter) |
|
Y axis travel |
230mm |
|
|
Z axis travel |
150mm |
|
|
X axis servo motor power |
0.75kW |
|
|
Y axis servo motor power |
1kW |
|
|
Z axis servo motor power |
1kW |
|
|
Slide form |
Linear Guides |
|
